SuniRay Intraoral X-ray Sensor

Function and Ergonomic Design with Great Service from SUNI

Designed for all of your intraoral imaging needs, SuniRay sensors are extremely comfortable, flexible and easy to use. Suni Medical Imaging provides unlimited support for the lifetime.

Designed with rounded corners for increased patient comfort
Built to last with a reinforced cable attachment, SuniRay sensors are extremely reliable and durable
The plug and play sensors are easy to install and can be operated in different PC's throughout the practice
Since one size does not fit all patients, two sensor sizes are available, including children and adults with special anatomical considerations
Integrated USB module allows you to easily move the sensors from room to room

Technical data	Size 1	Size 2
Sensor Dimensions (mm)	39.5 x 26	43.5 x 31.5
Active Area (mm)	31.1 x 20.2	35.2 x 26.2
Sensor Technology	CMOS APS Fiber Plate	CMOS APS Fiber Plate
Maximum Gray Levels	4096	4096
Sensor Cable	3 feet (1m)	3 feet (1m)
Cable Attachment	Reinforced Strain Relief	Reinforced Strain Relief
USB Module	Integrated USB 2.0 Module	Integrated USB 2.0 Module
Software	Prof. Suni	Prof. Suni
Warranty	2 years	2 years

X-Ray Imaging Properties

Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source.
Does Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film.
Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures.
Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range.

Sensor Material Biocompatibility Specifications

The sensor's body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices).

Sensor Storage Requirements

The sensor must be stored and operated in at a temperature range between 18ºC and 40ºC.

Un

Function and Ergonomic Design with Great Service from SUNI

X-Ray Imaging Properties

Sensor Material Biocompatibility Specifications

Sensor Storage Requirements